Online Support
Corporate/Bulk Orders Get Support from our B2B Sales Team
Contact

UV SG2350A SERIES MOUNTED OZONE GENERATOR

Uses: The SG-HVAC 2350A is a small, duct mounted UV ozone generator designed for use in buildings, offices, hotels, and F&B outlets, spas, hallways where odors, mold, mildew and bacteria are a problem. It is capable of freshening an area of up to 20,000+ sq/ft and is especially effective on...

Uses:

The SG-HVAC 2350A is a small, duct mounted UV ozone generator designed for use in buildings, offices, hotels, and F&B outlets, spas, hallways where odors, mold, mildew and bacteria are a problem. It is capable of freshening an area of up to 20,000+ sq/ft and is especially effective on smoking floors. Installation is simple and requires just 4 small holes to be drilled in the side of the air ducting or at the AHU or FC. This unit has a variable control for continuously adjusting the output from 20 mg/hr up to 2400 mg/hr. Standard unit comes with a 10 ft cable between the control box and the 4 UV tubes. Cables up to 50 feet are available. This unit can be used alone, or in combination with the SGOS4P1 Digital Ozone Controller. (which acts in a similar manner to a thermostat.)

Generation Method:

4 High Efficiency long life ( 2-3 years ) American made 3rd generation UV tubes.

Supply Gas:

Ambient Air

Ozone Output:


FULLY ADJUSTABLE output range from 20 to 2400 mg/hr

Controls:

Power On- O ff rocker switch. FULLY ADJUSTABLE ozone output level control knob for precisely adjusting the ozone output level from 20-2400 mg/hr. Also available is an optional LED Electronic timer with 9 time settings, (Always on, 10, 30 min 1, 2, 4, 8, 12, 18, 36hr) or a Programmable 24/7-day 280 event digital timer.

Dimensions:

Control box: 5" W X 22" H X 3" D; Tube mount with tubes installed: 12" x12" x 15.75 long (tube)


Electrical:

120/220/240V, 2Amp, 140Watts maximum, 50/60 Hz

Construction:

20 gauge 316 Stainless Steel

UV Tube Life Expectancy and Cost:

Up to 24 months or more, depending on the output setting and maintenance frequency. Our American made replacement UV Tubes cost only $150

Maintenance:

Normal duty use requires wiping the tubes with alcohol every 3-6 months. It takes less than 5 minutes! Under very dirty or dusty conditions, more frequent cleaning may be necessary

Warranty:

The HVAC 2350 electronics are warranted against defects in materials and workmanship for a period of SIX YEARS from date of purchase. The UV tubes are warranted for 2 YEARS. Liability is limited to parts and labor only. Shipping is the sole responsibility of the customer. ProMedUSA is not liable for damage caused by shipping, misuse, neglect or lack of regular cleaning or maintenance.

You have successfully subscribed!
This email has been registered
ico-collapse
0
Recently Viewed
Top
ic-expand
ic-cross-line-top